1993 Research Publications

Mechanical and Materials Engineering

Books and Chapters

Kirk, T.B. and Stachowiak, G.W. Fractal computer image analysis of particle morphology, Complex Systems - From Biology to Computation, eds D.G. Green, T. Bossomaier, Amsterdam / Oxford, IOS Press, pp 193-207 (1993)

Norton, M.P. Fundamentals of noise and vibration analysis for engineers, Beijing (1993)

Stachowiak, G.W. and Batchelor, A.W. Engineering Tribology, Ansterdam, Elsevier Science Publishers B.V. (1993)

Stachowiak, G.W. Friction and wear of polymers, ceramics and composites in biomedical applications, Advances in Composites Tribology, ed K. Friedich, Amsterdam, Elsevier Science Publishers B.V., 8: pp 509-557 (1993)

Journal Articles

Abromeit, C. and Estrin, Y. Point-defect-drivern dislocation patterning during deformation under irradiation, Applied Physics A, 57: pp 123-129 (1993)

Alonso, T., Liu, Y., Dallimore, M.P. and Mccormick, P.G. Low temperature reduction of SmCI3 during mechanical milling, Scripts Metallurgica et Materialia, 29: pp 55-58 (1993)

Batchelor, A.W. and Stachowiak, G.W. Control of friction and wear by the application of tribology, Journal of the Institution of Engineering Singapore, 33:4, pp 91-99 (1993)

Bush, M.B. Modelling of Nanophase Materials, Material Science and Engineering, A161: pp 127-134 (1993)

Bush, M.B. The stagnation flow behind a sphere, Journal Non-Newtonian Fluid Mechanics, 49: pp 103-122 (1993)

Bush, M.B. A method for approximate prediction of extrudate swell, Polymer Engineering and Science, 33: pp 950-958 (1993)

Ding, J., Liu, Y., Mccormick, P.G. and Street, R. Remanence enchancement in isotropic SmCo powder, Journal of Magnetism and Magnetic Materials, 123: pp 239-242 (1993)

Ding, J., Mccormick, P.G. and Street, R. Structure and magnetic properties of mechanically alloyed SmxCo1-x, Journal of Alloys and Comopunds, 191: pp 197-201 (1993)

Ding, J., Mccormick, P.G. and Street, R. Remanence enchancement in mechanically alloyed istropic Sm7Fe93 nitride, Journal of Magnetism and Magnetic Materials, pp 1-4 (1993)

Estrin, Y. and Giese, A. Steady state behaviour of alloy 800H under cyclid deformation, Scripts Metallurgica et Materialia, 29: pp 1223-1228 (1993)

Estrin, Y., Kubin, L.P. and Aifantis, E.C. Introductary remarks to the viewpoint set on propagative plastic instabilities, Scripta Metallurgica et Materialia, 29: pp 1147-1150 (1993)

Favier, D., Liu, Y. and Mccormick, P.G. Three stage transformation behaviour in aged NiTi, Scripta Metallurgica et Materialia, 28: pp 669-672 (1993)

Giese, A. and Estrin, Y. Mechanical behaviour and microstructure of fatigued alnmumium single crystals, Scripta Metallurgica et Materialia, 28: pp 803-807 (1993)

Hamblin, M.G. and Stachowiak, G.W. Comparsion of boundary fractal dimension from projected and sectioned particle images. Part I - technique evaluation, Journal of Computer Assisted Microscopy, 5:4, pp 291-300 (1993)

Hu, X.Z. and Mai, Y.W. Mode-I Delamination and fibre bridging in carbon fibre/epoxy composites with and without PVAL coating, Composites Science and Technology, 46: pp 147-156 (1993)

Huang, H., Huang, Q.K., Zhu, X.Z. and Hu, X.Z. An experimental investigation of the strengths of individual brown corundum abrasive grains, Scripta Metallurgica et Materialia, 29: pp 299-304 (1993)

Kirk, T.B., Wilson, A.S. and Stachowiak, G.W. The morphology and composition of the superficial zone of mammalian articular cartilage, Journal of Orthopaedic Rheumatology, 6:1, pp 21-28 (1993)

Kirk, T.B., Wilson, A.S. and Stachowiak, G.W. The effects of dehydration on the surface morphology of articular cartilage, Journal of Orthopaedic Rheumatology, 6:2/3, pp 75-80 (1993)

Ling, C.P., Mccormick, P.G. and Estrin, Y. A load perturbation method of examining dynamic strain ageing, Acta Metallurgica et Materialia, 41: pp 3323-3330 (1993)

Ling, C.P. and Mccormick, P.G. The effect of temperature on strain rate sensitivity in an A1-Mg-Si alloy, Acta Metallurgica et Materialia, 41: pp 3127-3131 (1993)

Mammoli, A.A. and Bush, M.B. A boundary element analysis of metal matrix composite materials, International Journal of Numerical Methods in Engineering, 36: pp 2415-2433 (1993)

Mccormick, P.G., Venkadesan, V. and Ling, C.P. Propagative instabilities: an experimental view, Scripta Metallurgica et Materalia, 29: pp 1159-1164 (1993)

Mccormick, P.G., Liu, Y. and Miyazaki, S. Intrinsic thermal-mechanical behaviour associated with the stress-induced martensitic transformation in NiTi, Materials Science and Engineering, A167: pp 51-56 (1993)

Mischler, S., Rosset, E., Stachowiak, G.W. and Landolt, D. Effect of sulphuric acid concentration on the rate of tribo-corrosion of iron, Wear, 167: pp 101-108 (1993)

Molinari, A., Estrin, Y. and Dudzinski, D. Thermomechanical instability associated with heat release during plastic flow, International Journal of Plasticity, 9: pp 317-343 (1993)

Nathan, R.J. and Norton, M.P. Vibration signature based condition monitoring of bowl-roller coal pulverizers, Journal of Vibration and Acoustics, ASMS Transactions, 115: pp 452-462 (1993)

Pan, J. A note on the prediction of acoustic intensity, Journal of the Acoustical Society of America, 94: pp 1641-1644 (1993)

Pan, J.Q., Hansen, C.H. and Pan, J. Active isolation of a vibration source from a thin beam using a single active mount, Journal of the Acoustical Society of America, 94: pp 1425-1434 (1993)

Reyhani, M.M. and Mccormick, P.G. Mechanical and shape memory behaviour in an Fe-Mn-Si-Cr-Ni alloy, Materials Science and Engineering, A160: pp 57-61 (1993)

Stachowiak, G.W. and Stachowiak, G.B. Environmental effects on wear of toughened zirconia ceramics, Wear, 160: pp 153-162 (1993)

Webb, A., Stachowiak, G.W., O'Neill, P.L. and Batchelor, A.W. The effects of small temperature changes on the lubricating properties of synovial fluid, Journal of Orthopaedic Rheumatology, 6:4, pp 81-87 (1993)

Yang, H. and Mccormick, P.G. Reduction of tantalum chloride by magnesium during reaction milling, Journal of Materials Science Letters, 12: pp 1088-1091 (1993)

Yang, H. and Mccormick, P.G. Synthesis of titanium oxynitride by mechanical milling, Journal of Materials Science, 28: pp 5663-5667 (1993)

Yang, H. and Mccormick, P.G. Combustion reaction of zinc oxide with magnesium during mechanical milling, Journal of solid state chemistry, 107: pp 258-263 (1993)

Others

Alonso, T., Dallimore, M.P., Liu, Y. and Mccormick, P.G. Synthesis of rare eath magnetic materials by chemical reduction via mechanical alloying, 12th International Workshop on Rare-Earth Magnets and Their Applications, pp 24-31 (1993)

Braasch, H. and Estrin, Y. Parameter identification for a two-internal variable constitutive model using the evolution strategy, The American Society of Mechanical Engineers Winter Annual Meeting, MD43 and AMD 168: pp 47-56, New York (1993)

Cammaramo, R., Favier, D. and Guelin, P. Application of a phenomenological elastohysteresis theory to the modelling of magnetisation, 7th International Symposium on Magnetic Anisotropy and Coercivity in Rare-Earth Transition Metal Alloys, pp 137-150 (1993)

Devenish, D.G., Entwistle, R.D. and Stone, B.J. An interactive course in engineering dynamics, Teaching Forum, Sharing Quality Practice, 1: pp 311-319, Perth (1993)

Devenish, D.G. and Stone, B.J. A systems approach to transient heat transfer, Australian Heat and Mass Transfer Conference, 1: pp 1-6;Section 17, Brisbane (1993)

Ding, J., Mccormick, P.G., Street, R. and Smith, P.A.L. Synthesis of isotropic Sm-Fe-N powders, 12th International Workshop on Rare Earth Magnets and Their Applications, pp 428-434 (1993)

Ding, J., Street, R. and Mccormick, P.G. Magnetic behaviour of mechanically alloyed, 7th International Symposium on Magnetic Anisotropy and Coercivity in Rare-Earth Transition Metal Alloys, Rare-Earth Information Centre: pp 130-136 (1993)

Edwards, M.S. and Spencer, L.C. Performance estimation of photovoltaic pump sets in different confirgurations, Bridging Gaps Between Research Development and Markets, 2: pp 428-433, Fremantle (1993)

Freckleton, J. and Stone, B.J. Use of Hypercard for graphics geometric dimensioning and tolerancing training, Americal Society for Engineering Education, 1: pp 156-159, Washington D.C. (1993)

Hu, X.Z. and Wittmann, F.H. Characterisation of fictitious crack with compliance measurements, 1st Bolomey-Workshop on Numerical Models in Fracture Mechanics of Concrete, 1: pp 29-39, Zurich (1993)

Karczub, D., Norton, M.P. and Pan, J. The prediction of dynamic stress in elastic structures from vibration measurement, Dynamic Loading in Manufacturing Service, NCP 93/1: pp 123-130, Melbourne (1993)

Kirk, T.B. and Stachowiak, G.W. Assessment of wear in knee joints in-vivo, XIV I.S.B. Congress in Biomechanics, I: pp 690-691, Paris (1993)

Kirk, T.B. and Stachowiak, G.W. Fractal analysis of the morphology of wear particles from dsymptomatic and arthritic synovial joints, XIV I.S.B. Congress in Biomechanics, I: pp 686-687, Paris (1993)

Kirk, T.B. and Stachowiak, G.W. The effect of dehydration on the surface of articular cartilage, XIV I.S.B. Congress in Biomechanics, I: pp 688-689, Paris (1993)

Kirk, T.B. and Stachowiak, G.W. Fractal image analysis of wear particle boundaries and surface for machine condition monitoring, 5th International Congress on Condition Monitoring and Diagnostic Engineering Management, pp 121-126, Bristol (1993)

Kirk, T.B. and Stachowiak, G.W. Image analysis of wear particles from synovial joints for the study of arthritic disorders, 5th Internation Congress on Condition Monitoring and Diagnostic Engineering Management, pp 115-120, Bristol (1993)

Li, X. and Stone, B.J. The coupling of torsional and transverse vibration in reciprocating engines, Experimental and Theortical Mechanics Conference, 1: pp 409-415, Bandung, Indonesia (1993)

Li, X. and Stone, B.J. The teaching of vibration by means of self-teach computer programs and laboratories, Experimental and Theoretical Mechanics Conference, 1: pp 426-431, Bandung, Indonesia (1993)

Ling, C.P., Mccormick, P.G. and Estrin, Y. A technique to probe dynamic strain ageing, Advances in Engineering Plasticity and its Appplication, 1: pp 455-460 (1993)

Liu, Y. and Mccormick, P.G. Influence of heat treatment on the internal resistance to the martensite transformation in NiTi, &th International Conference on Martensite Transformations, pp 923-928 (1993)

Mccormick, P.G., Liu, Y., Yang, H., Nguyen, G. and Alonso, T. Chemical refining via mechanical alloying, 2nd International Conference on Structural Applications of Mechanical Alloying, pp 165-169, Vancouver (1993)

Mccormick, P.G., Huang, H., Dallimore, M.P., Ding, J. and Pan, J. The dynamics of mechanical alloying, 2nd International Conference on Structural Applications of Mechanical Alloying, pp 45-50, Vancouver (1993)

Mccormick, P.G., Miyazaki, S. and Liu, Y. Intrinsic transformation influenced mechanical behaviour in an NiTi allow, 7th International Conference on Martensitic Transformations, pp 999-1002 (1993)

Mccormick, P.G., Ding, J., Liu, Y. and Street, R. Remancement in mechanically alloyed permanent magnet materials, 2nd International Conference on Structural Applications of Mechanical Alloying, pp 349-352, Vancouver (1993)

Mccormick, P.G., Street, R., Ding, J., Liu, Y. and Smith, P.A.I. Mechanically alloyed rare-earth permanent magnets, 12th International Workshop in Rare-Earth Magnets and Their Applications, pp 392-399 (1993)

Mccormick, P.G. Processing of rare earth permanent magnets by mechanical alloying, International Conference in Processing Materials for Processing, pp 675-678 (1993)

Miyazaki, S., Liu, Y., Otsuka, K. and Mccormick, P.G. Electrical resistance changes in NiTi during thermal cycling under load, Wayman, C.M., pp 929-934 (1993)

Norton, M.P. Vibration acceptance criteria for piping systems, International Noise 93, 1-III: pp 1783-1786, Leuven, Belgium (1993)

O'Neill, P.L. and Stachowiak, G.W. The thixotropic behaviour of synovial fluid, XIV I.S.B. Congress in Biomechanics, 2: pp 970-971, Paris (1993)

Ong, M. Development of a PC based two-axis HCTL-1100 programmable motion controller board, pp 1-38 (1993)

Ong, M. Motor test rig, pp 1-35 (1993)

Ong, M. and Trevelyan, J.P. PC-based two-axis HCTL-1100 programmable motion controller board, Perth (1993)

Ong, M. and Trevelyan, J.P. Two-axis roboccano rig, Perth (1993)

Ong, M. Two-axis roboccano rig, pp 1-45 (1993)

Reyhani, M. and Mccormick, P.G. Shape memory behaviour in Fe-Mn-Co-Ni-Si Alloys, &th International Conference on Martensitic Transformations, pp 1163-1168 (1993)

Stachowiak, G.W., Batchelor, A.W. and Griffiths, L.J. Friction and wear of cartilage surface layers, XIV I.S.B. Congress in Biomechanics, 2: pp 1276-1277, Paris (1993)

Stone, B.J. Torsional vibration - its importance excitation measurement and modelling, Experimental and Theortical Mechanics Conference, 1: pp 182-190, Bandung, Indonesia (1993)

Trevelyan, J.P. Robot force control without stability problems, International Symposium on Experimental Robotics, 1:, Kyoto (1993)

Trevelyan, J.P. Prospects for robotics in the '90s: will we see robot shearers?, robots for Competitive Industries: Conference of Australian Robot Association, 1: pp 163-178, Brisbane (1993)

Trevelyan, J.P. Little-X Users Manual Revision 0.0, pp 1-35 (1993)

Trevelyan, J.P. Robotic sheep shearing: recent research results, 3rd International Workshop on Robotics in Food and Agriculture, 1: pp 69-79, Brisbane (1993)

Trevelyan, J.P. and Apgar, J. Egg Trek: the new generation Robot Construction Competition, 5: pp 10-10 (1993)

Trevelyan, J.P. ANCTOMM Newsletter, 2:1,2,3, pp 1-10 (1993)

Trevelyan, J.P. Little-X, Perth (1993)

Wager, J.G. and Sharman, J.M. ACDMM A successful UK program for pragmatic orientation of graduates into manufacturing, Australian Conference on Manufacturing Engineering, 1: pp 347-351, Adelaide (1993)

Walker, G.W. MC1000 Motor Controllor Graphical User Interface, pp 1-17 (1993)