1994 Research Publications

Mechanical and Materials Engineering

Books and Chapters

Norton, M.P. Fundamentals of Noise and Vibration Analysis for Engineers, Cambridge, Cambridge University Press (1994)

Stachowiak, G.W. and Stachowiak, G.B. Wear Behaviour of Ceramic Cutting Tools, Advanced Ceramics for Cutting Tool Applications-1, eds Xing Sheng Li, It-Meng Low, Aedermannsdorf, Switzerland, Trans Tech Publications Ltd, 96: pp 137-164 (1994)

Journal Articles

Balke, H. and Estrin, Y. Micromechanical Modelling of Shear Banding in Single Crystals, International Journal of Plasticity, 10:2, pp 133-147 (1994)

Batchelor, A.W. and Stachowiak, G.W. Tribology in Materials Processing, Journal of Materials Processing Technology, 48: pp 503-515 (1994)

Brechet, Y. and Estrin, Y. On a Pseudo-Porterin-Le Chatelier Effect, Scripta Metallurgica et Materialia, 31:2, pp 185-190 (1994)

Brechet, Y. and Estrin, Y. The Effect of Strain Rate Sensitivity on the Dynamic Friction of Metals, Scripta Metallurgica et Materialia, 30:11, pp 1449-1454 (1994)

Brechet, Y. and Estrin, Y. On the Influence of Strain Rate Sensitivity on the Wear in the Archard Regime, Scripta Metallurgica et Materialia, 30:11, pp 1455-1460 (1994)

Brechet, Y. and Estrin, Y. On the Influence of Precipitation on the Porterin-Le Chatelier Effect, Acta Metallurgica et Materialia, 43:3, pp 955-963 (1994)

Bush, M.B. On the stagnation flow behind a sphere in a shear thinning viscoelastic fluid, J Non-Newtonian Fluid Mechanics, 55: pp 229-247 (1994)

Cammarano, R., Mccormick, P.G. and Street, R. The Measurement of Irreversible Magnetization and Activation Volumes, Journal of Applied Physics, 75: pp 5481-5484 (1994)

Crew, D.C., Mccormick, P.G. and Street, R. MnAIC Permanent Magnets Produced by Mechanical Alloying, Scripta Metallurgica et Materialia, 32: pp 315-319 (1994)

Ding, J., Liu, Y., Street, R. and Mccormick, P.G. High Magnetic Performance in Isotropic Fe-Sm2Fe17Nx, Journal of Applied Physics, 75:2, pp 1032-1035 (1994)

Ding, J., Shen, B., Mccormick, P.G. and Street, R. Magnetic Hardening of mechanically Milled Sm2Fe14Ga3C2, Journal of Alloys and Compounds, 209: p 221 (1994)

Ding, J., Mccormick, P.G. and Street, R. A Study of Sm13(Co1-xFex)87 Prepared by Mechanical Alloying, Journal of Magnetism and Magnetic Materials, 135: p 201 (1994)

Ding, J., Miao, W.F., Mccormick, P.G. and Street, R. High Magnetic Performance on Mechanically Alloyed Co Substituted Fe3O4, Applied Physics Letters, 65: pp 3135-3136 (1994)

Feutrill, E.H., Mccormick, P.G. and Street, R. Simulation of Magnetisation Reversal in Two Phase Exchange Coupled Nanocrystalline Materials, Journal of Applied Physics, 75: pp 5701-5703 (1994)

Folks, L., Street, R., Woodward, R. and Mccormick, P.G. Magnetocaloric Dependence of Magnetic Viscosity Measurements in NdFeB, Journal of Applied Physics, 75: pp 6634-6636 (1994)

Hamblin, M.G. and Stachowiak, G.W. Variation of Particle Shape Parameters when Viewed as a Projection and a Section, Journal of Computer Assisted Microscopy, 6: pp 51-59 (1994)

Hesterman, D.C.and Stone, B.J. A Systems Approach to the Torsional Vibration of Multi-Cylinder Reciprocating Engines and Pumps, Proceedings of the Institution of Mechanical Engineers, 208:C6, pp 395-408 (1994)

Leggoe, J.W., Hu, X.Z., Swain, M.V. and Bush, M.B. An ultra micro indentation investigation of aspects of the fracture process in particulate reinforced metal matrix composites, Scripta Metallurgica et Materialia, 31: pp 577-582 (1994)

Li, H., Entwistle, R.D. and Stone, B.J. Impact Excitation of Torsional Vibration, Modal Analysis: The International Journal of Analytical and Experimental Modal Analysis, 9:n3, pp 163-174 (1994)

Li, H., Hesterman, D.C.and Stone, B.J. A Systems Approach for Modelling in the Time Domain, Transactions of Mechanical Engineering, Institution of Engineers Australia, ME19:No 3, pp 123-128 (1994)

Ling, C.P., Estrin, Y. and Mccormick, P.G. Ramped Oscillatory Testing: A New Technique to Examine Dynamic Strain Ageing, Acta Metallurgica et Materialia, 42:5, pp 1541-1549 (1994)

Liu, Y. and Mccormick, P.G. Thermodynamic Analysis of the Martensitic Transformations in NiTi - I: Effect of Heat Treatment on Transformation Behaviour, Acta Metallurgica et Marterialia, 42:7, pp 2401-2406 (1994)

Mccormick, P.G. and Liu, Y. Thermodynamic Analysis of the Martensitic Transformations in NiTi - II: Effect of Transformation Cycling, Acta Metallurgica et Materialia, 42:7, pp 2407-2413 (1994)

Milham, C.D. Structure and Magnetic Properties of Mechanically Alloyed SmFe2, Journal of Applied Physics, 75: pp 5659-5661 (1994)

Reyhani, M.M. and Mccormick, P.G. Effect of Thermomechanical Cycling in an Fe-Mn-Si-Cr-Ni Shape Memory Alloy, Scripta Metallurgica et Materialia, 31: pp 875-878 (1994)

Rivory, J.F., Hansen, C.H. and Pan, J. A dynamic model of a simply supported beam excited by a pair of out of phase piezoelectric actuators, Journal of Intelligent Material Systems and Structures, 5: pp 654-664 (1994)

Rowlands, S.A., Hall, A.K., Mccormick, P.G., Street, R., Hart, R.J., Ebell, G.F. and Donecker, P. Destruction of Toxic Waste, Nature, 367: p 223 (1994)

Sohn, M.S. and Hu, X.Z. Mark-II Delamination Toughner of Carbon-Fibre/Epoxy Composites with Chopped Kevlar Fibre Reinforcement, Composites Science and Technology, 52: pp 439-448 (1994)

Sohn, M.S. and Hu, X.Z. Delamination Behaviour of Carbon Fibre/Epoxy Composite Laminates with Short Fibre Reinforcement, Scripta Metallurgica et Materialia, 30:11, pp 1467-1472 (1994)

Stachowiak, G.W., Batchelor, A.W. and Griffiths, L.J.Friction and Wear Changes in Synovial Joints, Wear, 171: pp 135-142 (1994)

Stachowiak, G.W., Stachowiak, G.B. and Batchelor, A.W. Suppression of Fretting Wear between Roping Wires by Coatings and Laser Alloyed Layers of Molybdenum, Wear, 178: pp 69-77 (1994)

Street, R., Allen, P., Ding, J., Feutrill, E., Folks, L. and Woodward, R.C.Magnetisation Processes in Remanence Enhanced Materials, Journal of Applied Physics, 76: pp 70-74 (1994)

Weedon, D.M. and Cousens, D.R. Combining Optical and Backscattered Electron Images to Measure Mineral Parameters, Microbeam Analysis, 3: pp 177-184 (1994)

Weppelmann, E.R., Hu, X.Z. and Swain, M.V. Observations and Sample Fracture Mechanics Analysis of Indentation Fracture Delamination of TiN films on Silicon, J Adhesion Science & Technology, 8:6, pp 611-624 (1994)

Yang, H. and Mccormick, P.G. Mechanochemical Reduction of V2O5, Journal of SolidStateChemistry, 110: pp 136-141 (1994)

Conference Publications

Bowman, W.F. and Stachowiak, G.W. Determining the Oxidation Stability of Lubricating Oils Using Sealed Pan Differential Scanning Calorimetry (SPDSC), 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Perth, Uniprint, 1: pp 149-156 (1994)

Bush, M.B. Cracking and fracture of particle reinforced composite materials, 16th International Conference on Boundary Element Methods, Southampton, Computational Mechanics Publishers, 1: pp 381-388 (1994)

Bush, M.B. and Mammoli, A.A. Numerical modelling of microstructural interactions in particulate reinforced aluminium alloys, Korea-Australia Joint Seminar on Advanced Light Alloys, Taejon, RASOM, 1: pp 1-20 (1994)

Derry, S. and Stone, B.J. A Systems Approach to the Modelling of the Torsional Vibration of Complex Engineering Systems, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 245-250 (1994)

Devenish, D.G. and Stone, B.J. A Novel Vibration Damper for Low Frequencies and Low Amplitudes, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 199-205 (1994)

Ding, J., Mccormick, P.G. and Street, R. Mechanically Alloyed Sm2Fe17Nx-Fe and Sm-(Co,Fe) Showing Remanence Enhancement, Eighth International Symposium on Magnetic Anisotropy and Coercivity in Rare Earth Transition Metal Alloys, Birmingham, REMXIII, 1: pp 63-70 (1994)

Ding, J., Mccormick, P.G., Street, R., Shen, B. and Wang, F. Structure and Magnetic Properties of Mechanically Alloyed Sm2Fe17-xGaxC2, 13th International Workshop on Rare Earth Magnets and their Applications, Birmingham, REMXIII, 1: pp 787-793 (1994)

Ding, J., Mccormick, P.G. and Street, R. Magnetisation Processes in High Coercivity SmCo5 and Sm2Fe17Nx Prepared by Mechanical Alloying, IUMRS International Conference on Advanced Materials, Tokyo, pp 1059-1062 (1994)

Drew, S.J. and Stone, B.J. Torsional Vibration Measurements for Large Diameter Shafts, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 101-110 (1994)

Entwistle, R.D. and Stone, B.J. A Study of the Potential Use of Modal Shapes in Locating Flaws in Shafts, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 19-26 (1994)

Farag, N.H.and Pan, J. A study of the vibrational power flow in coupled beam structures using the receptance method, International Mechanical Engineering Congress, Perth, Institution of Engineers Australia, 3: pp 41-45 (1994)

Feutrill, E.H., Ding, J., Street, R. and Mccormick, P.G. Modelling and Measurement of Remanence Enhancement in Two Phase Nanocrystalline Materials, IUMRS International Conference on Advanced Materials, Tokyo, pp 1055-1059 (1994)

Folks, L., Feutrill, E.H., Street, R., Smith, P.A.I. and Mccormick, P.G. Magnetisation Reversal in Recoil Curves in Two Phase Exchange Coupled Permanent Magnet Materials, Eight International Symposium on Magnetic Anisotropy and Coercivity in Rare Earth Transition metal Alloys, Birmingham, REMXIII, pp 297-306 (1994)

Hamblin, M.G. and Stachowiak, G.W. Fractal Dimensions From Images, WASEM - Image Analysis '94, Perth, UWA, 1: pp 43-61 (1994)

Hamblin, M.G. and Stachowiak, G.W. A Multi-Scale Measure of Particle Abrasivity and its Relation to Two Body Abrasive Wear, 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Perth, Uniprint, 1: pp 191-198 (1994)

Hesterman, D.C.and Stone, B.J. A Comparison of Secondary Inertia Effects in a Range of Reciprocating Engines, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 1-6 (1994)

Hu, X.Z., Mai, Y.W. and Cotterell, B. Analytical and Computer Simulations of Fracture Behaviour of Short-Fibre-Brittle-matrix Composites, 8th International Conference on Fracture (ICF8), Oxford, Pergammon, 8: pp 575-582 (1994)

Hu, X.Z. and Sohn, M.S. Influence of Interlaminar Reinforcement on Mixed Mode Delamination Toughness of Carbon Fibre/Epoxy Composites, Asian-Pacific Conference on Aerospace Technology and Science, APCATS '94, Beijing, International Academic Publishers, 3: pp 264-269 (1994)

Huang, H., Pan, J. and Mccormick, P.G. Identification of impact forces in a vibratory ball mill by an inverse technique, International Mechanical Engineering Congress, Perth, Institute of Engineers Australia, 3: pp 133-138 (1994)

Huang, H., Pan, J. and Mccormick, P.G. An investigation of chaotic phenomena in a vibratory ball milling system, COMPLEX '94, Amsterdam, IOS Press, 1: pp 373-379 (1994)

Karczub, D. and Norton, M.P. The prediction of dynamic stress in beams, plates and cylindrical shells for fatigue analysis using vibrational velocity mesurements, 3rd International Congress on Air and Structure Borne Sound and Vibration, Montreal, Concordia University, II: pp 919-930 (1994)

Kirk, T.B. and Stachowiak, G.W. Computer Image Analysis of Wear for Machine Condition Monitoring, Engineering Systems Design and Analysis Conference, New York, ASME, 64-5: pp 501-505 (1994)

Kirk, T.B. and Stachowiak, G.W. Computer Wear Particle Analysis for the Study of Arthritic Disorders, Engineering Systems Design and Analysis Conference, New York, ASME, 64-4: pp 69-73 (1994)

Kirk, T.B. and Stachowiak, G.W. In-vitro Wear of Knee Joints in the Absence of Muscle Compensation for Joint Loading, 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Perth, Uniprint, 1: pp 369-375 (1994)

Kirk, T.B. and Stachowiak, G.W. The Morphology of the Surface of Articular Cartilage, Second Congress of Biomechanics, Nijmegen, 1994 Stichting World Biomechanics, 1: p 208 (1994)

Kirk, T.B., O'Neill, P.L. and Stachowiak, G.W. A Combined Mechanism of Synovial Joints Lubrication, Second Congress of Biomechanics, Nijmegen, 1994 Stichting World Biomechanics, 2: p 214 (1994)

Liu, Y., Alonso, T., Dallimore, M.P. and Mccormick, P.G. Rare Earth Magnetic Materials Synthesised by Mechanical Alloying, IUMRS International Conference on Advanced Materials, Tokyo, pp 615-619 (1994)

Loneragan, B. and Stone, B.J. An Investigation of Railcar Dynamics and a Method of Improvement, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 225-231 (1994)

Lwin, D.T., Chua, P. and Stone, B.J. A Computer Assisted Learning Package for Sequential Control, IEEE First International Conference on Multi-Media Engineering Education, Melbourne, IEEAust, 2: pp 256-262 (1994)

Lyons, M., Li, X., Scott, N. and Stone, B.J. A Student Controlled Vibration Laboratory, Annual Australasian Association for Engineering Education Conference, Sydney, Australasian Association for Engineering Education, 1: pp 385-388 (1994)

Mammoli, A.A. and Bush, M.B. Three dimensional elastoplastic modelling of ceramic reinforced metal matrix composites using the boundary element method, CadComp 94, Southampton, Computational Mechanics Publishers, 1: pp 67-74 (1994)

Mccormick, P.G. and Maurice, D. Consolidation of Mechanically Alloyed Samarium-Iron-Nitride Alloys, 13th International Workshop on Rare Earth Magnets and their Applications, Birmingham, REMXiii, 1: pp 781-786 (1994)

Mccormick, P.G., Liu, Y., Chen, X. and Favier, D. Multistage Transformation Behaviour in NiTi, IUMRS International Conference on Advanced Materials, Tokyo, pp 961-964 (1994)

Norton, M.P. Acoustically Induced Structural Vibration and Fatigue - A Review, 3rd International Congress on Air and Structure Borne Sound and Vibration, Montreal, Concordia University, I: pp 147-166 (1994)

Pan, J., Tian, J. and Paurobally, R. Feedback control of noise from a small cavity to a large inclosure, International Workshop on Modern Acoustics, Nanjing, University of Nanjing, 1: p 52 (1994)

Peng, H. and Pan, J. A digital simulation of an active noise control system using the filtered-x LMS algorithm, International Mechanical Engineering Congress, Perth, Institute of Engineers Australia, 3: pp 67-72 (1994)

Pritchard, S.M. and Stone, B.J. Prediction of Crankshaft Velocity Fluctuation in a 3-cylinder, 2-stroke Engine Due to a Single Misfire, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 35-39 (1994)

Ranasinghe, J. and Stone, B.J. The Effects of Con-Rod and Bearing Flexibility on the Torsional Vibration of Engines, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 117-125 (1994)

Scott, N., Devenish, D.G., Entwistle, R.D. and Stone, B.J. Computer-based error detectionin Engineering Dynamics Education, American Society of Engineering Education Annual Conference, Alberta, Canada, American Society of Engineering Education, 2: pp 2481-2485 (1994)

Scott, N., Devenish, D.G., Entwistle, R.D. and Stone, B.J. Dynamic Teaching Solutions, IEEE First International Conference on Multi-Media Engineering Education, Melbourne, IEEAust, 2: pp 419-427 (1994)

Scott, N., Devenish, D.G., Entwistle, R.D. and Stone, B.J. Computer-Based Assessment in Engineering Teaching, Annual Australasian Association for Engineering Education Conference, Sydney, Annual Australasian Association for Engineering, 1: pp 682-686 (1994)

Scott, N., Devenish, D.G., Entwistle, R.D. and Stone, B.J. A Computer Package for Teaching Curvilinear Motion, Annual Australasian Association for Engineering Education Conference, Sydney, Australasian Association for Engineering Education, 1: pp 718-721 (1994)

Scott, N. Simple computer assessment of a sketched graph, American Society of Engineering Education Annual Conference, Alberta, Canada, American Society of Engineering Education, 2: pp 2571-2574 (1994)

Scott, N.W. and Stachowiak, G.W. Long-Term Behaviour of UHMWPE in Hydrogen Peroxide Solutions, 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Perth, Uniprint, 1: pp 169-174 (1994)

Smith, P.A.I., Mccormick, P.G. and Street, R. Structure and Hard Magnetic Properties of Sm-(Co-Fe) Alloys Produced via Mechanical Alloying, 13th International Workshop on Rare Earth Magnets and their Applications, Birmingham, REMXIII, 1: pp 425-433 (1994)

Soon, M. and Stone, B.J. The Optimisation of the Static and Dynamic Stiffness of Spindle Systems, International Mechanical Engineering Congress, Noise and Vibration Conference, Canberra, IEAust, Canberra, 3: pp 233-238 (1994)

Stachowiak, G.B., Stachowiak, G.W. and Batchelor, A.W. Application of Surface Coatings and Laser Surface Alloying to Control Fretting Wear of Roping Wire, 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Perth, Uniprint, 1: pp 321-328 (1994)

Stachowiak, G.B. and Stachowiak, G.W. Fretting Wear and Friction Behaviour of Engineering Ceramics, 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Perth, Uniprint, 1: pp 291-297 (1994)

Stachowiak, G.W. and Hamblin, M.G. Application of Fractals to the Description of Shape of the Particles found in Tribological Systems, 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Perth, Uniprint, 1: pp 181-190 (1994)

Stachowiak, G.W. Lubrication and Wear, 1994 Mechanical Residential Summer School, Electricity Supply Association of Australia, Perth, University of Western Australia, 1: pp 145-179 (1994)

Stachowiak, G.W. 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Proceedings, Tribology Conferences, Perth, Uniprint, II: pp 462-959 (1994)

Stachowiak, G.W. 4th International Tribology Conference, AUSTRIB '94, "Frontiers in Tribology", Proceedings, Tribology Conferences, Perth, Uniprint, 1: pp 1-461 (1994)

Stone, B.J. A Computer Assisted Learning Package for Two-degree of Freedom Vibration, American Society of Engineering Education Annual Conference, Alberta, Canada, American Society of Engineering Education, 1: pp 1262-1266 (1994)

Stone, B.J. Experiences in the Use of Computers for Teaching, Annual Australasian Association for Engineering Education Conference, Sydney, Australasian Association for Engineering, 1: pp 511-516 (1994)

Stone, B.J. Immediate Identification of Student Misunderstandings and Errors (An Intelligent Computer Tutor), New Approaches to Undergraduate Engineering Education VI, Terra Haute, Indiana, Rose Itulman Institute of Technology, 1: pp 99-106 (1994)

Tian, J., Pan, J., Peng, S.Q. and Peng, H. System analysis for active noise control, International Workshop on Modern Acoustics, Ninjang, University of Ninjang, 1: p 31 (1994)

Trevelyan, J.P. Renewed first year course for engineering students, National Conference of Australasian Association for Engineering Education, Sydney, AAEE (1994)

Wager, J.G. Applications of High Technology in Manufacturing, ESAA 1994 Conference, Perth, UWA, 2: pp 372-381 (1994)

Others

Mccormick, P.G. and Schaffer, G.B. (Patent) Process for the Production of Metal Products B9 Combined Mechanical Activation and Chemical Reduction, 5,328,501, United States (1994)

Ridout, S and Trevelyan, J.P. V, 1.0, Perth (1994)

Scott, N., Devenish, D.G., Entwistle, R.D. and Stone, B.J. Engineering Dynamics, 1.0, Perth (1994)

Trevelyan, J.P. Little-X, 1.3, Perth (1994)

Trevelyan, J.P. Cal, 1.0, Perth (1994)

Trevelyan, J.P. Robot calibration with extended Kalman Filter, :250-R-95, pp 1-45, Perth (1994)

Wong, H. Programming ASEA Robot, :251-R-95, pp 1-22, Perth (1994)