1995 Research Publications

Mechanical and Materials Engineering

Books and Chapters

Estrin, Y. and Kubin, L.P. Spatial Coupling and Propagative Plastic Instabilities, Continuum Models for Materials with Microstructure, ed H.B. Muhlhaus, New York, J. Wiley and Sons, 1: pp 395-450 (1995)

Journal Articles

Anamalay, R.V., Kirk, T.B. and Panzera, D. Numerical descriptors for the analysis of wear surfaces using laser scanning confocal microscopy, Wear, 181-183: pp 771-776 (1995)

Batchelor, A.W. and Stachowiak, G.W. Model of Scuffing Based on the Vulnerability of an Elastohydrodynamic Oil Film to Chemical Degradation Catalyzed by the Contacting Surfaces, Tribology Letters, 1:4, pp 349-365 (1995)

Batchelor, A.W. and Stachowiak, G.W. Revealing the Hidden World of Wear and Friction, Mechanical Engineering Transactions, Journal of the Inst. of Engineers, Australia, ME 20:1, pp 5-13 (1995)

Brechet, Y. and Estrin, Y. On the Influence of Precipitation on the Portevin - Le Chatelier Effect, Acta Metallurgica et Materialia, 43: pp 955-967 (1995)

Chiu, W.K., Soria, J. and Norton, M.P. Laminar Boundary Layer Receptivity to Transverse Structural Vibration, Journal of Sound and Vibration, 186:3, pp 463-493 (1995)

Constable, D.C. and Bush, M.B. Three dimensional bi-component extrusion simulations by the boundary element method, Computational Mechanics (Springer-Verlag), 16:2, pp 114-124 (1995)

Crew, D.C. and Mccormick, P.G. "MnAl and MnAlC Permanent Magnets Produced by Mechanical Alloying", Scripta Metallurgica et Materialia, 32: pp 315-318 (1995)

Ding, J., Eilon, M., Street, R., St.pierre, T.G., Smith, P. and Mccormick, P.G.Magnetic Properties of Mechanically Alloyed Nanocrystalline Fe25Cu75, Journal of Magnetism and Magnetic Materials,, 144 (part1): pp 471-472 (1995)

Ding, J., Mccormick, P.G. and Street, R. Magnetic Properties of Mechanically Alloyed CoFe2O4, SolidStateCommunications, 95(1): pp 31-33 (1995)

Ding, J., Mccormick, P.G. and Street, R. A Study of Melt-Spun SmCo5 Ribbons, Journal of Alloys and Compounds, 228(1): pp 102-104 (1995)

Ding, J., Yang, H., Miao, W.F., Mccormick, P.G. and Street, R. High Coercivity Ba-hexaferrite Prepared by Mechanical Alloying, Journal of Alloys and Compounds, 221: pp 70-73 (1995)

Ding, J., Street, R. and Mccormick, P.G. Mšssbauer and Magnetic Study of Melt-spun Nd4.5B18.5Fe77 Ribbons, Journal of Magnetism and Magnetic Materials, 140-144:2, pp 1071-1072 (1995)

Ding, J., Miao, W.F., Mccormick, P.G. and Street, R. Mechanochemical Synthesis of Ultrafine Fe Powder, Applied Physics Letters, 67(25): pp 3804-3806 (1995)

Ding, J., Mccormick, P.G. and Street, R. Mechanically Alloyed RE11Fe84Ti5 with RE=Nd and Sm and Their Nitrides, Journal of Alloys and Compounds, 217: pp 108-111 (1995)

Ding, J., Huang, H., Mccormick, P.G. and Street, R. Magnetic Properties of Martensite - Austenite Mixtures in Mechanically Milled 304 Stainless Steel, Journal of Magnetism and Magnetic Materials, 139: pp 109-114 (1995)

Ding, J., Maurice, D., Miao, W.F., Mccormick, P.G. and Street, R. Hexaferrite Magnetic Materials prepared by Mechanical Alloying, Journal of Magnetism & Magnetic Materials, 150(3): pp 417-420 (1995)

Favier, D., Liu, Y. and Manach, P.Y. Influence of Prior Thermomechanical Treatment on the Training Behaviour of a NiTi Alloy, Journal de Physique IV, 5: pp 391-396 (1995)

Hamblin, M.G and Stachowiak, G.W. A Multi-Scale Measure of Particle Abrasivity, Wear, 185: pp 225-233 (1995)

Hamblin, M.G. and Stachowiak, G.W. A Multi-Scale Measure of Particle Abrasivity and Its Relation to Two Body Abrasive Wear, Wear, 190: pp 190-196 (1995)

Hamblin, M.G. and Stachowiak, G.W. Environmental and Sheave Material Effects on the Wear of Roping Wire and Sheave, Tribology International, 28:5, pp 307-315 (1995)

Hamblin, M.G. and Stachowiak, G.W. Application of Richardson Technique to the Analysis of Surface Profiles and Particle Boundaries, Tribology Letters, 1: pp 95-108 (1995)

Hesterman, D. C. and Stone, B. J. Secondary Inertia Effects in the Torsional Vibration of Reciprocating Engines - a Literature Review, Proceedings of the Institution of Mechanical Engineers (UK), Vol 209 No C1: pp 11-15 (1995)

Huang, H., Zhu, X.H., Huang, Q.K. and Hu, X.Z. Weibull Strength Distributions and Fracture Characteristics of Abrasive Materials, Engineering Fracture Mechanics, 52:1, pp 15-24 (1995)

Kirk, T.B., Panzera, D., Anamalay, R.V. and Xu, Z.L. Computer image analysis of wear debris for machine condition monitoring and fault diagnosis, Wear, 181/183: pp 717-722 (1995)

Lebyodkin, M.A., Brechet, Y., Estrin, Y. and Kubin, L.P. Statistics of the Catastrophic Events in the Portevin - Le Chatelier Effect, Physical Review Letters, 74: pp 4758-4761 (1995)

Ling, C.P., Bush, M.B. and Perera, D.S. The effect of fabrication techniques on the properties of Al-SiC composites, Journal of Materials Processing Technology (Elsevier), 48: pp 325-331 (1995)

Liu, Y., Favier, D. and Orgeas, L. Influence of Elastic Energy on the Unloading Behaviour of Niti Shape Memory Alloys, Journal de Physique IV, 5: pp 593-598 (1995)

Mammoli, A.A. and Bush, M.B. Effects of reinforcement geometry on the elastic and plastic properties of metal matrix composites, Acta Metallurgica Materialia (Pergamon), 43:10, pp 3743-3754 (1995)

Mccormick, P.G. and Ling, C.P. Numerical Modelling of the Portevin Le Chatelier Effect, Acta Metallurgica et Materialia, 43: pp 1969-1977 (1995)

Pan, J. A second note on the prediction of sound intensity, Journal of the Acoustical Society of America, 97:1, pp 691-694 (1995)

Pan, J. and Elliott, S. J. Analysis of Sound Field Response in a Damped Rectangular Enclosure for Active Control of Noise, Institute of Sound and Vibration Research Technical Memorandum, 763: pp 1-18 (1995)

Podsiadlo, P. and Stachowiak, G.W. Median-Sigma Filter for SEM Wear Particle Images, Journal of Computer Assisted Microscopy, 7:2, pp 67-82 (1995)

Podsiadlo, P. and Stachowiak, G.W. Analysis of Shape of Wear Particles Found in Synovial Joints, Journal of Orthopaedic Rheumatology, 8: pp 155-160 (1995)

Robinson, J.S., Mccormick, P.G. and Street, R. Structure and Properties of Cu2MnAl Synthesised by Mechanical Alloying, Journal of Physics-Condensed Matter, 7(22): pp 4259-4269 (1995)

Smith, P.A.I., Mccormick, P.G. and Street, R. Formation and Hard Magnetic Properties of Sm-Co-Fe Materials Produced via Mechanical Alloying, Materials Science Forum, 179-181: pp 527-532 (1995)

Sohn, M.S. and Hu, X.Z. Comparative Study of Dynamic and Static Delamination Behaviour of Carbon Fibre-Epoxy Composite Laminates, Composites, 26: pp 849-858 (1995)

Stachowiak, G.B. and Stachowiak, G.W. Fretting Wear and Friction Behaviour of Engineering Ceramics, Wear, 190: pp 212-218 (1995)

Stachowiak, G.B., Stachowiak, G.W. and Batchelor, A.W. Application of Surface Coatings and Laser Surface Alloying to Control Fretting Wear of Roping Wire, Mechanical Engineering Transactions, Journal of the Inst. of Engineers, Australia, ME 20:2, pp 113-120 (1995)

Stachowiak, G.W. and Hamblin, M.G. Application of Fractals to the Description of Shape of the Particles Found in Tribological Systems, Mechanical Engineering Transactions, Journal of the Inst. of Engineers, Australia, ME 20:2, pp 127-136 (1995)

Yang, H., Nguyen, G. and Mccormick, P.G. Mechanochemical Reduction of CuO by Graphite, Scripta Metallurgica et Materialia, 32: pp 681-684 (1995)

Conference Publications

Anamalay, R.V. and Kirk, T.B. The advantages of laser scanning confocal microscopy (LSCM) over conventional styles profilometry for the assessment of surfaces, 1994 (CM)2 FORUM, Melbourne, Monash University, 1: pp 1-8 (1995)

Dehmler, I.E. and Spencer, L.C. Model to Estimate Performance of Photovoltaic Pump Sets Under Different Operating Conditions, Solar Ô95, ANZSES, Hobart, Australian and New Zealand Solar Energy Society, Tasmanian Branch, 1: pp 539-547 (1995)

Devenish, D. G., Entwistle, R. D., Scott, N. and Stone, B. J. An assessment package with diagnostic facilities, International Conference on Computers in Education, Singapore, Information Technology Institute, Singapore, Applications Track: pp 101-107 (1995)

Devenish, D. G., Entwistle, R. D., Scott, N. and Stone, B. J. A Computer Package for Teaching Planar Kinematics, International Conference on Computers in Education, Singapore, Information Technology Institute, Singapore, Applications Track: pp 149-154 (1995)

Devenish, D. G., Entwistle, R. D., Scott, N. and Stone, B. J. The teaching of work/energy to first-year engineering students, 7th Annual Convention and Conference of the Australasian Association for Engineering Education, Melbourne, USICEE, Monash University, 1: pp 64-69 (1995)

Drew, S. J. and Stone, B. J. Excitation of Torsional Vibration For Rotating Machinery Using a 1.7 Kw Ac Servo-Drive, Second International Conference on gearbox Noise, Vibration and Diagnostics, London, Mechanical Engineering Publications, 1: pp 171-181 (1995)

Drew, S.J. and Stone, B.J. Impact Excitation of Torsional Vibration Systems, 13th International Modal Analysis Conference, Bethel, Connecticut, USA, Society for Experimental Mechanics, Inc., II: pp 1432-1436 (1995)

Hesterman, D. C. and Stone, B. J. The Consequences for Torsional Vibration Modelling of Representing Reciprocating Mechanisms by Simplified Models., 13th International Modal Analysis Conference, Bethel, Connecticut, USA, Society for Experimental Mechanics, Inc., 1: pp 387-392 (1995)

Hesterman, D. C. and Stone, B. J. Secondary Resonance in a Single Cylinder Engine, Vibration and Noise '95, Staffordshire, UK, Staffordshire University, 1: pp 151-161 (1995)

Hu, X.Z. and Wang, H. Surface Contact of Ceramic Laminates, Australian Materials Conference, Perth, Institution of Metals and Materials Australia, 1: pp 146-157 (1995)

Lebyodkin, M.A., Brechet, Y., Estrin, Y. and Kubin, L.P. Dynamic Strain Ageing and Stick-Slip Instabilities: A Parallell Approach and Statistical Study, SolidStatePhenomena, 42/43: pp 313-324 (1995)

Lee, D., Fisher, G.V., Hu, X.Z. and Mccormick, P.G. Production of Aluminium/Alumina Metal Matrix Composites by Mechanical Alloying, Australasian Materials Conference, Perth, Institution of Metals and Materials Australia, pp 95-102 (1995)

Leggoe, J.W., Bush, M.B. and Hu, X.Z. Micro-mechanisms of fracture and crack growth resistance in particulate reinforced metal matrix composites, Australasian Materials Conference, Shape Sensing_Structure, Perth, Institution of Metals and Materials, Australia, 2: pp 103-114 (1995)

Li, X. and Stone, B. J. Coupling Mechanisms between Torsional and Transverse Vibration in Reciprocating Engines and Compressors, 13th International Modal Analysis Conference, Bethel, Connecticut, USA, Society for Experimental Mechanics, Inc., II: pp 1373-1377 (1995)

Mammoli, A.A. and Bush, M.B. Manufacturing and modelling cast aluminium-ceramic particulate composite materials, Australasian Materials Conference, Perth, Institution of Engineers, Australia, 2: pp 115-124 (1995)

Panzera, D. and Kirk, T.B. The development of software for imaging of wear debris, 1994 (CM)2 FORUM, Melbourne, Monash University, 1: pp 163-170 (1995)

Panzera, D., Kirk, T.B. and Anamalay, R.V. Analysis of wear debris from normal and arthritic synovial joints using numerical descriptors of wear particle morphology., XVth Congress of the International Society of Biomechanics, Jyvaskyla, Bummerus Printing, pp 712-713 (1995)

Scott, N. and Stone, B. J. The qualitative assessment of curvilinear motion, 7th Annual Convention and Conference of the Australasian Association for Engineering Education, Melbourne, USICEE, Monash University, 1: pp 271-274 (1995)

Scott, N. and Stone, B.J. Student behaviour near a deadline as a predictor of academic success, ASCILITE Ô95 (Australian Society for Computers in Learning in Tertiary Education), Melbourne, The Science Multimedia Teaching Unit, University of Melbourne, 1: pp 462-467 (1995)

Spedding, T. and Stone, B. J. Development of a Hypermedia System for Teaching Statistical Process Control, International Conference on Computers in Education, Singapore, Information Technology Institute, Singapore, Applications Track: pp 214-221 (1995)

Stone, B.J. A review of some CAL initiatives in the UK (with particular reference to assessment), Teaching and Learning Forum Ô95, Perth, Educational Development Unit, Edith Cowan University, 1: pp 245-249 (1995)

Taylor, K. and Trevelyan, J.P. Australia's telerobot on the World Wide Web, 26th International Symposium on Industrial Robots, Singapore, MET, 1: pp 39-44 (1995)

Trevelyan, J. P. Simplifying Robotics, Workshop on Some Critical Issues in Robotics, Singapore, National University of Singapore Applied Research Corporation, 1: pp 118-135 (1995)

Wang, H., Hu, X.Z. and Lincoln, F.J. Influence of Residual Stresses on Fracture Behaviour of Zirconia/Alumina Ceramic Laminates, 14th Australasian Conference on the Mechanics of Structures, Hobart, University of Tasmania, 1: pp 6-11 (1995)

Wright, D.C. Using Design and Build Projects in a First Course in Engineering, Proceeding of the 4th Conference on Teaching Engineering Designers, Sydney, School of Mechanical and Manufacturing Engineering NSW, 1: pp 264-277 (1995)

Xu, Z.L., Kirk, T.B. and Kuhnell, B.T. The development of laser scanning confocal microscopy for image analysis of wear debris, 1994 (CM)2 FORUM, Melbourne, Monash University, 1: pp 225-232 (1995)

Others

Hu, X.Z. and Wang, H. Cracking Resistant Ceramic Laminates, pp 7-8, Perth (1995)

Mccormick, P.G. (Review)Application of Mechanical Alloying to Chemical Refining, Materials Transactions of the Japan Institute of Metals, 36: pp 161-169, Tokoyo (1995)

Taylor, K., Phillips, T., Murphy, P., Saracik, B. and Trevelyan, J.P. Telerobot, 2, Perth (1995)

Trevelyan, J.P. Snakes Revision 2, 2, Perth (1995)

Trevelyan, J.P. Little-X Revision 2, 2, Perth (1995)

Trevelyan, J.P. Little-X Toolkit User Manual Revision 2, :N003, p 41, Perth (1995)

Trevelyan, J.P. ANCToMM Newsletter, ANCToMM Newsletter, :1, p 9, Perth(1995)

Trevelyan, J.P. Simplifying Robot Calibration, Australian Robot Association, Sydney (1995)