1997 Research Publications

Mechanical and Materials Engineering

Books and Chapters

McCormick, P.G. Mechanical Alloying and Mechanically Induced Chemical Reactions, Handbook on the Physics and Chemistry of Rare Earths, eds K.A.Jr. Gschneider, L. Eyring, Amsterdam, The Netherlands, Elsevier Science BV, 24: pp 47-81 (1997)

Journal Articles

Bao, C. and Pan, J. Experimental study of different approaches for active control of sound transmission through double walls, Journal of the Acoustical Society of America, 102:3, pp 1664-1670 (1997)

Bermig, G., Bartels, A., Mecking, H. and Estrin, Y. A Unique Description of Steady State Deformation of Al and Al-Mg Alloys, Materials Science and Engineering A, 234-237: pp 904-907 (1997)

Bush, M.B., Papa Petros, P.E. and Barrett-Lennard, B. On the flow through the human female urethra, J. Biomechanics, 30:9, pp 967-969 (1997)

Dallimore, M.P. and McCormick, P.G. Distinct Element Modelling of Mechanical Alloying in a Planetary Ball Mill, Materials Science Forum, 235-238: pp 5-14 (1997)

Devenish, D.G. and Stone, B.J. Sub-structuring Non-Linear Dynamic Systems in the Time Domain, Mathematics and Computers in Simulation, 43: pp 159-170 (1997)

Ding, J., McCormick, P.G. and Street, R. Formation of Spinel Mn-ferrite During Mechanical Alloying, Journal of Magnetism and Magnetic Materials, 171:3, pp 309-314 (1997)

Ding, J., Tsuzuki, T. and McCormick, P.G. Hematite Powders Synthesised by Mechanochemical Processing, Nanostructured Materials, 8: pp 739-747 (1997)

Ding, J., Tsuzuki, T. and McCormick, P.G. Mechanochemical Synthesis of Ultrafine ZrO2 Powder, Nanostructured Materials, 8: pp 79-81 (1997)

Drew, S.J. and Stone, B.J. Torsional (rotational) vibration - Excitation of small rotating machines, Journal of Sound and Vibration, 201(4): pp 437-463. (1997)

Drew, S.J. and Stone, B.J. Removal of speckle harmonics in laser torsional vibrometry, Journal of Mechanical Systems and Signal Processing, 11 No 5: pp 773-776. (1997)

Estrin, Y., Mercier, S. and Molinari, A. The Role of Rate Effects and of Thermomechanical Coupling in Shear Localization, Journal of Engineering Materials and Technology, 119:4, pp 1-10 (1997)

Farag, N. H. and Pan, J. Dynamic response and power flow in three-dimensional coupled beam structures, I: Analytical modelling, Journal of the Acoustical Society of America, 102: pp 315-325 (1997)

Gong, Y and Norton, M.P. Strain controlled cumulative fatigue with mean strains and high-cycle and low-cycle interaction, ASTM Journal of Testing and Evaluation, 25:4, pp 429 - 438 (1997)

Guigou, C.C., Gentry, A., Pan, J. and Fuller, C. R. Active control of sound radiation using foam-PVDF-plate passive/active composite device, International Journal of Acoustics and Vibration, 2:3, pp 113-118 (1997)

Guo, J. N., Pan, J. and Bao, C. Actively created quiet zones by multiple control sources in free field, Journal of the Acoustical Society of America, 101: pp 1492-1501 (1997)

Guo, J. N. and Pan, J. Further investigation on actively created quiet zones by multiple control sources in free space, Journal of the Acoustical Society of America, 102:6, pp 3530-3541 (1997)

Guo, J. N. and Pan, J. Application of active noise control to noise barriers, Journal of Australia Acoustical Society, 25: pp 11-16 (1997)

Hamblin, M.G. and Stachowiak, G.W. Characterization of Surface Abrasivity and Its Relation to Two-Body Abrasive Wear, Wear, 206: pp 69-75 (1997)

Hesterman, D.C., Entwistle, R.D. and Stone, B.J. Axial and Torsional Receptances for Tapered Circular Shafts, Modal Analysis: The International Journal of Analytical and Experimental Modal Analysis, 11: pp 178-193 (1997)

Hu, X.Z. Toughness measurements from crack close to free edge, International Journal of Fracture, 86: pp L63-L68 (1997)

Hu, X.Z. and Wong, H. Conpression-shear failure of cementitious materials with oblique weak layers, Theoretical and Applied Fracture Mechanics, 26: pp 53-62 (1997)

Huang, H., Pan, J. and McCormick, P.G. On the dynamics of mechanical milling in a vibratory mill, Journal of Materials Science and Engineering A, 232: pp 55-62 (1997)

Huang, H., Dallimore, M.P., Pan, J. and McCormick, P.G. An Investigation of the Effect of Powder on the Impact Characteristics Between a Ball and a Plate Using Free Falling Experiments, Materials Science and Engineering, A241: pp 38-47 (1997)

Huang, H., Pan, J. and McCormick, P.G. Prediction of Impact Forces in a Vibratory Ball Mill Using an Inverse Technique, International Journal of Impact Energy, 19: pp 117-126 (1997)

Huang, H. and McCormick, P.G. Effect of Milling Conditions on the Synthesis of Chromium Carbides by Mechanical Alloying, Journal of Alloys and Compounds, 256: pp 258-262 (1997)

Huang, H. and Bush, M.B. Finite element analysis of the mechanical properties in discontinuously reinforced metal matrix composites with ultrafine microstructure, Mat. Sci. Eng.A, A232:1/2, pp 63-72 (1997)

Kessissoglou, N. J. and Pan, J. An analytical investigation of the active attenuation of the plate flexural wave transmission through a reinforcing beam, Journal of the Acoustical Society of America, 102:6, pp 3530-3541 (1997)

Kuster, M., Wood, G.A., Stachowiak, G.W. and Gachter, A. Joint Load Considerations in Total Knee Replacement, Journal of Bone and Joint Surgery, 79B(1): pp 109-113 (1997)

Lebyodkin, M., Dunin-Barkovskii, L., Bréchet, Y., Kubin, L. and Estrin, Y. Kinetics and Statistics of Jerky Flow: Experiments and Computer Simulations, Materials Science and Engineering A, 234-236: pp 115-118 (1997)

Liu, Y., Chen, X. and McCormick, P.G. Effect of Low Temperature Ageing on the Transformation Behaviour of Near-Equiatomic NiTi, Journal of Materials Science, 32: p 5979 (1997)

Liu, Y. and Galvin, S.P. Criteria for Pseudoelasticity in Near-Equiatomic NiTi Shape Memory Alloys, Acta Materialia, 45: pp 4431-4439 (1997)

Miao, W.F., Ding, J., McCormick, P.G. and Street, R. Magnetic Behaviour of Mechanically Milled (Nd1-xDyx)(8)Fe88B4, Journal of Magnetism and Magnetic Materials, 175:3, pp 304-310 (1997)

Miao, W.F., Ding, J., McCormick, P.G. and Street, R. Magnetic and Structural Properties of High Remanence Nd8(FeCo)88B4 Prepared by Mechanical Milling, Journal of Applied Physics, 82:9, pp 4439-4444 (1997)

Miao, W.F., McCormick, P.G. and Street, R. High Magnetic Performance in a Two-Phase NdDyFeCoB Alloy, Solid State Communications, 101:9, pp 687-691 (1997)

Miller, K. and Chinzei, K. Constitutive Modelling of Brain Tissue; Experiment and Theory, Journal of Biomechanics, 30:11/12, pp 1115-1121 (1997)

Pedersen, R.C. and Norton, M.P. Quantification of acoustic and hydrodynamic fields in flow duct systems, Applied Acoustics, 50:3, pp 205 - 229 (1997)

Peng, Z., Kirk, T.B. and Xu, Z.L. The development of three dimensional imaging techniques of wear particle analysis, Wear, 203-204: pp 418-424 (1997)

Peng, Z. and Kirk, T.B. 2-Dimensional fast Fourier transform and power spectrum for wear particle analysis, Tribology International, 30:8, pp 583-590 (1997)

Podsiadlo, P. and Stachowiak, G.W. Characterization of Surface Topography of Wear Particles by SEM Stereoscopy, Wear, 206: pp 39-52 (1997)

Podsiadlo, P., Kuster, M. and Stachowiak, G.W. Numerical Analysis of Wear Particles from Non-Arthritic and Osteorthritic Human Knee Joints, Wear, 210: pp 318-325 (1997)

Rabkin, E., Gust, W. and Estrin, Y. On Dynamic Segregation in the Discontinuous Precipitation Reaction, Scripta Materialia, 37: pp 119-124 (1997)

Stachowiak, G.W., Stachowiak, G.B. and Campbell, P. Application of Numerical Descriptors to the Characterization of Wear Particles Obtained from Joint Replacements, Proceedings of the Institution of Mechanical Engineers - Part H - Engineering in Medicine, 211: pp 1-10 (1997)

Stachowiak, G.W. and Podsiadlo, P. Analysis of Wear Particle Boundaries Found in Sheep Knee Joints During in In-Vitro Wear Tests Without Muscle Compensation, Journal of Biomechanics, 30:4, pp 415-419 (1997)

Street, R. and McCormick, P.G. Permanent Magnet Materials, Materials Forum, 21: pp 101-116 (1997)

Trevelyan, J. P. Simplifying Robotics: A challenge for researchers, Journal of Robotics and Autonomous Systems, 21:3, pp 1-14 (1997)

Trevelyan, J. P. Robots and Landmines, Industrial Robot, 24:2, pp 114-125 (1997)

Tsuzuki, T., Ding, J. and McCormick, P.G. Mechanochemical Synthesis of Ultrafine Zinc Particles, Physica B, Condensed Matter, 239: pp 378-387 (1997)

Tsuzuki, T. and McCormick, P.G. Synthesis of CdS Quantum Dots by Mechanochemical Reaction, Applied Physics A, 65: pp 607-609 (1997)

Warris, C.J. and McCormick, P.G. Mechanochemical Processing of Refractory Pyrite, Minerals Engineering, 10: pp 1119-1125 (1997)

Conference Publications

Anamalay, R.V., Kirk, T.B. and Panzera, D. Three dimensional imaging and analysis of machine components, World Tribology Congress, Great Britain, Institution of Mechanical Engineers, 1: p 378 (1997)

Anamalay, R.V., Kirk, T.B. and Panzera, D. The development of endoscopes for the three dimensional imaging of surfaces, World Tribology Congress, Great Britain, Institution of Mechanical Engineers, 1: p 692 (1997)

Bao, C. and Pan, J. Mechanisms of active attenuation of noise transmission through double walls, The 1997 International Symposium on Active Control of Sound and Vibration, Hungary, Publishing Company of Technical University of Budapest, 1: pp 965-978 (1997)

Bao, C., Paurobally, R. and Pan, J. Feedback control of noise in a room, The 5th International Congress on Sound and Vibration, Adelaide, The International Institute of Sound and Vibration, 1: pp 279-286 (1997)

Chantler, P.M., Boyd, N. and Hu, X.Z. FEA study into the end effects of compressive loading, 36th Annual Scientific Meeting, Australian and New Zealand Division, Sydney, Journal of Dental Research, 76: p 945 (1997)

Cheng, J., Peng, Z. and Kirk, T.B. Wear particle analysis in ferrography for machine condition monitoring, International conference on plant engineering, Guangzhou, Guangzhou University, 1: pp 311-316 (1997)

Chinzei, K. and Miller, K. Compression of Swine Brain In Vivo, 16th International Society of Biomechanics Congress, Tokyo, University of Tokyo, 1: p 318 (1997)

Chinzei, K. and Miller, K. Measurement of Compressive Behavior of Swine Brain Tissue, World Congress of Medical Physics and Biomedical Engineering, Nice, International Union for Physical and Engineering Sciences in Medicine, 35: p 288 (1997)

Entwistle, R.D. and Stone, B.J. The Effect of Workpiece Torsional Flexibility on Chatter Performance in Cylindrical Grinding, Fifth International Congress on Sound and Vibration, University of Adelaide, South Australia, The International Institute of Acoustics and Vibration, 3: pp 1343 -1350 (1997)

Estrin, Y. and Molinari, A. Constitutive Modelling of High-Strain Rate Deformation: Application to Adiabatic Shear Banding, International Conference on Fracture (ICF-9), Oxford, Pergamon Press, 6: pp 2755-2769 (1997)

Heidecker, R.M., Drew, S.J. and Stone, B.J. An Experimental Investigation into Torsional Vibration in Ball Mills, Fifth International Congress on Sound and Vibration, University of Adelaide, South Australia, The International Institute of Acoustics and Vibration, 5: pp 2863 -2871 (1997)

Homma, K., Hyodo, K., Chinzei, K. and Miller, K. Novel Methods for Magnetic Resonance Imaging, NEDO Conference, Tokyo, New Energy and Industrial Technology Organization, Japan, 1: pp 396-397 (1997)

Hu, X.Z. and Wang, H. Analysis of contact stresses in ceramic laminates, 9th International Conference on Fracture, Sydney, Australia, Pergamon, 2: pp 1045-1052 (1997)

Hu, X.Z. and Wang, H. Fracture and damage at interfaces of ceramic laminates, 3rd International Conference on Fracture & Strength of Solids, Hong Kong, Trans Tech Publications Ltd, 145-149, Part 2: pp 901-906 (1997)

Ming, R. and Pan, J. The limitation of SEA prediction at medium frequencies, The 5th International Congress on Sound and Vibration, Adelaide, The International Institute of Sound and Vibration, 4: pp 2321-2328 (1997)

Pan, J. Approximating eigensolutions of distributed structures using the adjustable quasi comparison functions, The 5th International Congress on Sound and Vibration, Adelaide, The International Institute of Sound and Vibration, 5: pp 2411-2418 (1997)

Pan, J.Q., Liu, Y. and Pan, J. Control system design of active ear defenders, International Conference on Mechanical Transmissions and Mechanisms, Tianjin, China Machine Press, 1: pp 362-366 (1997)

Panzera, D., Kirk, T.B., Anamalay, R.V. and Kuster, M. Three dimensional computer image analysis of wear particles from normal and arthritic synovial joints using numerical measures of wear particle morphology, World Tribology Congress, Great Britain, Institution of Mechanical Engineers, 1: p 259 (1997)

Paurobally, R. and Pan, J. Feedback control of the first two resonances in a cavity, The 1997 International Symposium on Active Control of Sound and Vibration, Hungary, Publishing Company of Technical University of Budapest, 1: pp 21-23 (1997)

Pedersen, R.C. and Norton, M.P. Analysis of acoustic and hydrodynamic fields downstream of a sharp edge orifice in a flow duct system for highly turbulent flows, Fifth International Congress on Sound and Vibration, University of Adelaide, The International Institute of Acoustics and Vibration, 2: pp 579-590 (1997)

Peng, Z. and Kirk, T.B. Computer image analysis of wear particles in a combination of space and frequency domain descriptions in three dimensions, World Tribology Congress, London, Institution of Mechanical Engineers, 1: p 559 (1997)

Podsiadlo, P. and Stachowiak, G.W. Measurement and Characterization of Wear Particle Surface Topography, World Tribology Congress, London, Mechanical Engineering Publications Ltd. for the Institution of Mechanical Engineers, 1: p 377 (1997)

Reichert, B., Estrin, Y. and Schuster, H. Constitutive Equations Based on the 'One-Parameter-Model' Used for the Description of a Precipitation Hardenened High Temperature Alloy (Alloy 800H), 5th European Conference on Advanced Materials and Processes and Applications (EUROMAT '97), Zwijndrecht, The Netherlands, Netherlands Society for Materials Science, 1: pp 515-519 (1997)

Scott, N.W. and Stone, B.J. A flexible Web-based tutorial system for engineering, maths and science subjects, 1st Asia-Pacific Forum on Engineering and Technology Education, Monash University, Melbourne, Australia, USICEE, Faculty of Engineering, Monash University, 1: pp 141-146 (1997)

Sohn, M.S., Harler, S. and Hu, X.Z. Compressive strengths of carbon fibre composites with short-fibre reinforcement, 9th International Conference on Fracture, Sydney, Australia, Pergamon, 2: pp 893-900 (1997)

Sohn, M.S. and Hu, X.Z. Unidirectional carbon fibre/epoxy laminates interleaved by film adhesives and chopped Kevlar fibres, 3rd International Conference on Fracture & Strength of Solids, Hong Kong, Trans Tech Publications Ltd, 145-149, Part 2: pp 727-732 (1997)

Stachowiak, G.B. and Stachowiak, G.W. Tribological Characteristics of PSZ and TZP Ceramics in Fretting and Reciprocating Sliding., World Tribology Congress, London, Mechanical Engineering Publications Ltd. for the Institution of Mechanical Engineers, 1: p 236 (1997)

Stachowiak, G.W. Numerical Characterization of Wear Particle Morphology and Angularity of Particles and Surfaces, World Tribology Congress, London, Mechanical Engineering Publications Ltd. for the Institution of Mechanical Engineers, 1: pp 371-389 (1997)

Stachowiak, G.W., Stachowiak, G.B. and Campbell, P. Computer Based Method for the Analysis of Wear Particles from Synovial Joints and Joint Replacements, World Tribology Congress, London, Mechanical Engineering Publications Ltd. for the Institution of Mechanical Engineers, 1: p 258 (1997)

Trevelyan, J. P. What can robotics researchers learn from the landmine problem?, Field and Service Robotics Conference, Canberra, Australian Robot and Automation Association, 1: pp pp516-522 (1997)

Trevelyan, J. P. Better tools for deminers, International Workshop on Sustainable Humanitarian Demining, Lausanne, Switzerland, EPFL-LAMI, 1: pp s6.1-s6.12 (1997)

Vu, T. L. and Pan, J. Active control of nonlinear vibration in a flexible cantilever beam, The 5th International Congress on Sound and Vibration, Adelaide, The International Institute of Sound and Vibration, 1: pp 429-436 (1997)

Wheatley, G., Niefanger, R., Estrin, Y. and Hu, X.Z. Fatigue crack growth in 316L stainless steel, 3rd International Conference on Fracture & Strength of Solids, Hong Kong, Trans Tech Publications Ltd, 145-149, Part 2: pp 631-636 (1997)